Login or Register for FREE!
Subelement C

Components

Section 20

Capacitors

What factors determine the capacitance of a capacitor?

  • Voltage on the plates and distance between the plates.
  • Voltage on the plates and the dielectric constant of the material between the plates.
  • Amount of charge on the plates and the dielectric constant of the material between the plates.
  • Correct Answer
    Distance between the plates and the dielectric constant of the material between the plates.

What factors determine the capacitance of a capacitor?

Distance between the plates and the dielectric constant of the material between the plates.

The capacitance, measured in Farads depends on:

  • How big are the plates
  • Distance between the plates
  • How much the material making up the plates can handle the electrostatic charges.

\[\frac{\text{ ℇ A }}{\text{ d}} = \text{ Capacitance, in F }\]

A - an area the plates are in the same space, could touch
- it is the dielectric's permittivity
d - a distance between the plates
C - is the capacitance, measured in Farads

For more information, please see All About Circuits site for the article Factors Affecting Capacitance.

Last edited by markadlerdallas. Register to edit

Tags: none

In Figure 3C4, if a small variable capacitor were installed in place of the dashed line, it would?

  • Increase gain.
  • Increase parasitic oscillations.
  • Correct Answer
    Decrease parasitic oscillations.
  • Decrease crosstalk.

In Figure 3C4, if a small variable capacitor were installed in place of the dashed line, it would?

Decrease parasitic oscillations.

See Wikipedia's article on Parasitic oscillation

Also, see the Cadence site for the article Power Amplifier Oscillation: Parasitics and Effects on Amplifiers

And, see In Compliance site for the article Parasitic Oscillations and EMI Emissions

Last edited by markadlerdallas. Register to edit

Tags: none

In Figure 3C4, which component (labeled 1 through 4) is used to provide a signal ground?

  • 1
  • Correct Answer
    2
  • 3
  • 4

In Figure 3C4, which component (labeled 1 through 4) is used to provide a signal ground?

2

sammylandler:

Option number 2 on this diagram is correct because it is located next to the ground schematic symbol.

Last edited by markadlerdallas. Register to edit

Tags: none

In Figure 3C5, which capacitor (labeled 1 through 4) is being used as a bypass capacitor?

  • 1
  • 2
  • Correct Answer
    3
  • 4

In Figure 3C5, which capacitor (labeled 1 through 4) is being used as a bypass capacitor?

3

The number 3 capacitor bypasses the 100 ohms resistor.

Last edited by markadlerdallas. Register to edit

Tags: none

In Figure 3C5, the 1 μF capacitor is connected to a potentiometer that is used to:

  • Increase gain.
  • Neutralize amplifier.
  • Couple.
  • Correct Answer
    Adjust tone.

In Figure 3C5, the 1 μF capacitor is connected to a potentiometer that is used to:

Adjust tone.

It is connected to an adjustable resistors, so it adjusts the tone.

Last edited by markadlerdallas. Register to edit

Tags: none

What is the purpose of a coupling capacitor?

  • Correct Answer
    It blocks direct current and passes alternating current.
  • It blocks alternating current and passes direct current.
  • It increases the resonant frequency of the circuit.
  • It decreases the resonant frequency of the circuit.

What is the purpose of a coupling capacitor?

It blocks direct current and passes alternating current.

From wp2ahg:

A coupling capacitor connects two circuits. The capacitor allows only AC to pass, and DC is blocked.


See Wikipedia's article Capacitive coupling

Please see the Learning About Electronics site for the article What is a Coupling Capacitor?

YouTube Videos:

From Gaurav J - TheElectricalGuy channel, the video Introduction to Coupling capacitor (CC) | Video #10 2:42 minutes

From Simply Put channel, the video Decoupling Capacitors - Simply Put 17:58 minutes

Last edited by markadlerdallas. Register to edit

Tags: none

Go to 19 Go to 21